Compass Rose

Fitting the kit that we bought at the london boatshow

The wiring for the chartplotter, echo sounder, power outlets and speakers has now been finished.
There are 30 amp wires running from the battery to the dashboard and then the individual devices are wired from there with 10 amp wire.
The rear speakers (6" X 9" 300W Boss Marine) are mounted on the front of the engine cover. There seems to be a fault with one of the existing front speakers. I'll probably replace them with new speakers soon.
I fitted mini trunking in the cuddy to carry the aerial cable and the port side speaker cables. This is a much neater job than the strips of insulating tape that I used before.
The upholstrey has dried out after being cleaned and it's all put back again.
Ronnie made a strap to hold the flare kit. This is fitted beside the cuddy door.
We'll be taking Compass Rose back down to the boat club later this afternoon.